Tube and Band

Contact an agent >
FZT tube and band gold chain machine


Machine on stand, two possible distances between the tubes, mechanically settable: the alternation of the two distances is electronically programmable, variable speed, forced lubrication, wire end sensor, chain end sensor, fixed spool, eletronic chain collecting spool, chain density sensor, binocular attachment, without tool, in compliance with CE standards. 230V/50-60 Hz single phase power supply.

  • Industry 4.0

  • Main features
  • Strip / Wire Thickness: 0.15 - 0.80 mm
  • Tube / Wire Width: 3.00 - 8.00 mm
  • Distance between elements: 0.00 - 28.00 mm
  • Speed: 160 maglie/min


The FZT automatic machine for tube chain was designed to build and insert elements made from a shaped wire or a plate onto an existing chain. The machine is operated by two spools: a plate spool (alternatively, a half-round or flat wire spool) and a finished-chain spool. The machine cuts the plate into pieces, which are then wound onto the chain and shaped into a tube. The tube is closed and pressed onto the chain with a slight contrast to ensure an axial seal between the element and the chain itself. The distance between a pair of tubes can be set mechanically, while the alternation between pairs of tubes can be programmed electronically.

Discover what we can achieve together.

Share with us your needs and together we will find the best solution for producing your chain.

Contact us